To contribute to this page, edit the following file

Philips 7199960PH #

Model 7199960PH
Vendor Philips
Description Hue Iris
Supports on/off, brightness, color xy, power-on behavior
Picture Philips 7199960PH

Notes #

Pairing #

Philips LivingColors IRIS and Philips LivingColors Bloom Devices that comes with Philips (HUE) Remote Gen 2 (Touch Wheel) or Gen 3 (Round Click Wheel) can be paired via Zigbee. Devices with Gen 1 Remote don’t use Zigbee and can not be paired. The Philips LivingColors Remote can not be paired via Zigbee because it only support ZigBee Light Link (ZLL).

To Pair hold Button ON and Bottom Left Key (Favorite 1) on the Remote in Front of the Device until the Device Light blinks and lights Orange. If connection was succesfull the Device Light will light Green.

WARNING: If you pair your Device to a Zigbee Network which is not using a ZLL Channel you can’t reset the Device with the Philips LivingColors Remote Gen 3. The Gen 3 Remote will only try ZLL Channels to find the Device! Maybe it’s possible to reset the Device with a Philips LivingColors Remote Gen 2 as it should try all Zigbee Channels to find the Device.

Philips LivingColors Bloom Manual

Philips LivingColors Iris Manual

Pairing #

Factory resetting a Hue bulb can be accomplished in 4 ways. After resetting the bulb will automatically connect.

See Touchlink

Hue bridge #

When the bulb is still connected to the Hue bridge, you can simply factory reset the bulb by removing it from the bridge via the Hue app.

Hue dimmer switch #

VIDEO: Factory reset a Hue bulb with Hue dimmer switch.

TRADFRI remote control #

This may also be possible with the Tradfri Remote Control by pressing and holding the reset button on the bottom of the remote (next to the battery). This may not always work.

Power-on behavior #

Allows to set the power-on behavior of the bulb. Note that this requires at least November/December ‘18 firmware update of the bulb.

    "hue_power_on_behavior": "on",          //default, on, off, recover, default = on
    "hue_power_on_brightness": 125,         //default, same values as brightness, default = 255
    "hue_power_on_color_temperature": 280,  //default, same values as color_temp, default = 366
Attribute Value Description
default reset to factory default value
on lamps on after power loss with configured brightness, color-temperature, color (to-do)
off lamps off after power loss
recover last running state after power loss

Device type specific configuration #

How to use device type specific configuration

Manual Home Assistant configuration #

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    xy: true
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"

  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "-"
    value_template: "{{ value_json.linkquality }}"