To contribute to this page, edit the following file

Philips 17435/30/P7 #

Model 17435/30/P7
Vendor Philips
Description Hue Discover white and color ambiance flood light
Supports on/off, brightness, color xy, power-on behavior
Picture Philips 17435/30/P7

Notes #

Pairing #

Factory resetting a Hue bulb can be accomplished in 4 ways. After resetting the bulb will automatically connect.

See Touchlink

Hue bridge #

When the bulb is still connected to the Hue bridge, you can simply factory reset the bulb by removing it from the bridge via the Hue app.

Hue dimmer switch #

VIDEO: Factory reset a Hue bulb with Hue dimmer switch.

TRADFRI remote control #

This may also be possible with the Tradfri Remote Control by pressing and holding the reset button on the bottom of the remote (next to the battery). This may not always work.

Power-on behavior #

Allows to set the power-on behavior of the plug/bulb. Note that this requires at least November/December ‘18 firmware update of the device.

{
    "hue_power_on_behavior": "on",          // default, on, off, recover
    "hue_power_on_brightness": 125,         // same values as brightness
    "hue_power_on_color_temperature": 280,  // same values as color_temp
    "hue_power_on_color": "#0000FF",        // color in hex notation, e.g. #0000FF = blue

}
Attribute Value Description
default reset to factory default value
on bulb on after power loss with configured brightness, color-temperature and color
off bulb off after power loss
recover last running state after power loss

Rules:

Device type specific configuration #

How to use device type specific configuration

Manual Home Assistant configuration #

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    xy: true
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    icon: "mdi:signal"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"