Yushun YS-MT750L

ModelYS-MT750L
VendorYushun
DescriptionCurtain motor
Exposescover (state, position, tilt), options, flip_angle
PictureYushun YS-MT750L

Options

How to use device type specific configuration

  • invert_cover: Inverts the reported cover position and the state derived from it, false: open=100,close=0, true: open=0,close=100 (default false). The value must be true or false

Exposes

Cover

The current state of this cover is in the published state under the state property (value is OPEN or CLOSE). To control this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "OPEN"}, {"state": "CLOSE"}, {"state": "STOP"}. It's not possible to read (/get) this value. To change the position publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"position": VALUE} where VALUE is a number between 0 and 100. To change the tilt publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"tilt": VALUE} where VALUE is a number between 0 and 100.

Options (composite)

Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"options": {"motor_speed": VALUE, "reverse_direction": VALUE}}

  • motor_speed (numeric): Motor speed max value is 255
  • reverse_direction (binary): Reverse the motor direction allowed values: true or false

Flip angle (numeric)

Slat angle in degrees, same as tilt (0-100 %) on a 0-180° scale (only _TZE204_wzre8hu2). Value can be found in the published state on the flip_angle property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"flip_angle": NEW_VALUE}. The minimal value is 0 and the maximum value is 180. The unit of this value is °.