TuYa TS0013_switch_module
Model | TS0013_switch_module |
Vendor | TuYa |
Description | 3 gang switch module - (without neutral) |
Exposes | switch (state), power_on_behavior, switch_type, linkquality |
Picture | ![]() |
White-label | AVATTO 3gang N-ZLWSM01 |
Exposes
Switch (left endpoint)
The current state of this switch is in the published state under the state_left
property (value is ON
or OFF
). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_left": "ON"}
, {"state_left": "OFF"}
or {"state_left": "TOGGLE"}
. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_left": ""}
.
Switch (center endpoint)
The current state of this switch is in the published state under the state_center
property (value is ON
or OFF
). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_center": "ON"}
, {"state_center": "OFF"}
or {"state_center": "TOGGLE"}
. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_center": ""}
.
Switch (right endpoint)
The current state of this switch is in the published state under the state_right
property (value is ON
or OFF
). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_right": "ON"}
, {"state_right": "OFF"}
or {"state_right": "TOGGLE"}
. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_right": ""}
.
Power_on_behavior (enum)
Controls the behavior when the device is powered on. Value can be found in the published state on the power_on_behavior
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"power_on_behavior": ""}
. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"power_on_behavior": NEW_VALUE}
. The possible values are: off
, previous
, on
.
Switch_type (enum)
Switch type settings. Value can be found in the published state on the switch_type
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"switch_type": ""}
. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"switch_type": NEW_VALUE}
. The possible values are: toggle
, state
, momentary
.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.