To contribute to this page, edit the following file

Zemismart LXN56-SS27LX1.1 #

Model LXN56-SS27LX1.1
Vendor Zemismart
Description Smart light switch - 2 gang with neutral wire
Exposes switch (state), linkquality
Picture Zemismart LXN56-SS27LX1.1

Notes #

2 distinct devices #

This switch was 2 distinct Zigbee chips, so it’s seen as 2 separate devices.

Exposes #

Switch #

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.