Nue / 3A HGZB-41

VendorNue / 3A
DescriptionSmart one gang wall switch
Exposesswitch (state), linkquality
PictureNue / 3A HGZB-41



Reset of device is done by holding button for 20 secs until it starts to flash green. It will now automatically pair.



The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.