To contribute to this page, edit the following file

Hej GLSK6ZB-1716 #

Model GLSK6ZB-1716
Vendor Hej
Description Goqual 6 gang Switch
Exposes switch (state), linkquality
Picture Hej GLSK6ZB-1716

Notes #

None

Exposes #

Switch (top_left endpoint) #

The current state of this switch is in the published state under the state_top_left property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_top_left": "ON"}, {"state_top_left": "OFF"} or {"state_top_left": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_top_left": ""}.

Switch (bottom_left endpoint) #

The current state of this switch is in the published state under the state_bottom_left property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_bottom_left": "ON"}, {"state_bottom_left": "OFF"} or {"state_bottom_left": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_bottom_left": ""}.

Switch (center_left endpoint) #

The current state of this switch is in the published state under the state_center_left property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_center_left": "ON"}, {"state_center_left": "OFF"} or {"state_center_left": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_center_left": ""}.

Switch (center_right endpoint) #

The current state of this switch is in the published state under the state_center_right property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_center_right": "ON"}, {"state_center_right": "OFF"} or {"state_center_right": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_center_right": ""}.

Switch (top_right endpoint) #

The current state of this switch is in the published state under the state_top_right property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_top_right": "ON"}, {"state_top_right": "OFF"} or {"state_top_right": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_top_right": ""}.

Switch (bottom_right endpoint) #

The current state of this switch is in the published state under the state_bottom_right property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_bottom_right": "ON"}, {"state_bottom_right": "OFF"} or {"state_bottom_right": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_bottom_right": ""}.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.