To contribute to this page, edit the following file

SmartThings F-MLT-US-2 #

Model F-MLT-US-2
Vendor SmartThings
Description Multipurpose sensor (2016 model)
Exposes temperature, contact, battery_low, tamper, battery, moving, x_axis, y_axis, z_axis, linkquality
Picture SmartThings F-MLT-US-2

Notes #

Device type specific configuration #

How to use device type specific configuration

Exposes #

Temperature (numeric) #

Measured temperature value. Value can be found in the published state on the temperature property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is °C.

Contact (binary) #

Indicates if the contact is closed (= true) or open (= false). Value can be found in the published state on the contact property. It’s not possible to read (/get) or write (/set) this value. If value equals false contact is ON, if true OFF.

Battery_low (binary) #

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It’s not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Tamper (binary) #

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It’s not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Battery (numeric) #

Remaining battery in %. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Moving (binary) #

Indicates if the device is moving. Value can be found in the published state on the moving property. It’s not possible to read (/get) or write (/set) this value. If value equals true moving is ON, if false OFF.

X_axis (numeric) #

Accelerometer X value. Value can be found in the published state on the x_axis property. It’s not possible to read (/get) or write (/set) this value.

Y_axis (numeric) #

Accelerometer Y value. Value can be found in the published state on the y_axis property. It’s not possible to read (/get) or write (/set) this value.

Z_axis (numeric) #

Accelerometer Z value. Value can be found in the published state on the z_axis property. It’s not possible to read (/get) or write (/set) this value.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.