Moes ERS-10TZBVB-AA

Model	ERS-10TZBVB-AA
Vendor	Moes
Description	Smart button
Exposes	action, battery, operation_mode
Picture
White-label	COOLO ZG-101ZL

Notes

A triple click of the button switches operation modes. This is indicated by the received payload {"action": null, "operation_mode": NEW_VALUE} with values rotating between the modes listed in the respective section below. Depending on mode, the actions emitted by single click, double click and hold differ.

Pairing

Open the backcover with a screwdriver. Hold the reset button for 6s until the green LED starts flashing.

Options

How to use device type specific configuration

• simulated_brightness: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example:

simulated_brightness:
  delta: 20 # delta per interval, default = 20
  interval: 200 # interval in milliseconds, default = 200

Exposes

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It's not possible to read (/get) or write (/set) this value. The possible values are: single, double, hold, brightness_move_to_level, color_temperature_move, brightness_step_up, brightness_step_down, on, off.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Operation mode (enum)

Operation mode: "command" - for group control, "event" - for clicks. Value can be found in the published state on the operation_mode property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"operation_mode": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"operation_mode": NEW_VALUE}. The possible values are: command, event.