To contribute to this page, edit the following file

RGB Genie ZB-5121 #

Model	ZB-5121
Vendor	RGB Genie
Description	Micro remote and dimmer with single scene recall
Exposes	battery, action, linkquality
Picture

Notes #

Device type specific configuration #

How to use device type specific configuration

• simulated_brightness: Set to true to simulate a brightness value (default: false). If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. This can be done by instead of specifying true:

simulated_brightness:
  delta: 20 # delta per interval, default = 20
  interval: 200 # interval in milliseconds, default = 200

Exposes #

Battery (numeric) #

Remaining battery in %. Value can be found in the published state on the battery property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum) #

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It’s not possible to read (/get) or write (/set) this value. The possible values are: on, off, brightness_step_up, brightness_step_down, brightness_move_up, brightness_move_down, brightness_stop, recall_*.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.