Lincukoo W04-Z10T

Model	W04-Z10T
Vendor	Lincukoo
Description	Smart water leakage alarm sensor
Exposes	alarm_status, alarm_switch, alarm_ringtone, battery
Picture

Exposes

Alarm status (enum)

device alarm status. Value can be found in the published state on the alarm_status property. It's not possible to read (/get) or write (/set) this value. The possible values are: normal, alarm.

Alarm switch (enum)

switch of the alarm. Value can be found in the published state on the alarm_switch property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"alarm_switch": NEW_VALUE}. The possible values are: mute, alarm.

Alarm ringtone (enum)

Ringtone of the alarm. Value can be found in the published state on the alarm_ringtone property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"alarm_ringtone": NEW_VALUE}. The possible values are: ring1, ring2, ring3.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.