Lincukoo V06-Z10T
| Model | V06-Z10T |
| Vendor | Lincukoo |
| Description | Mini vibration sensor |
| Exposes | alarm_status, sensitivity, dismiss_alarm, silent_mode, battery_state |
| Picture |  |
Options
How to use device type specific configuration
time_start: Reply to Tuya-specific time synchronization requests: "1970" - Reply with seconds since 1970/01/01 (recommended, should stop the device from asking), "2000" - Reply with seconds since 2000/01/01 (use if the weekday is wrong with 1970), "off" - Don't reply (use if replying causes too much traffic). Default for this device: "off". The value must be one of1970,2000,off
Exposes
Alarm status (enum)
Indicates when vibration is detected. Value can be found in the published state on the alarm_status property. It's not possible to read (/get) or write (/set) this value. The possible values are: normal, alarm.
Sensitivity (enum)
Sensitivity level of the sensor. Value can be found in the published state on the sensitivity property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"sensitivity": NEW_VALUE}. The possible values are: low, middle, high.
Battery state (enum)
State of the battery. Value can be found in the published state on the battery_state property. It's not possible to read (/get) or write (/set) this value. The possible values are: low, medium, high.