To contribute to this page, edit the following file

Swann SWO-MOS1PA #

Model	SWO-MOS1PA
Vendor	Swann
Description	Motion and temperature sensor
Exposes	occupancy, battery_low, tamper, linkquality
Picture

Notes #

Temperature not supported #

Device is listed as having temperature detection. This feature is still being investigated.

Exposes #

Occupancy (binary) #

Indicates whether the device detected occupancy. Value can be found in the published state on the occupancy property. It’s not possible to read (/get) or write (/set) this value. If value equals true occupancy is ON, if false OFF.

Battery_low (binary) #

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It’s not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Tamper (binary) #

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It’s not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.