To contribute to this page, edit the following file

Sunricher SR-ZG9080A #

Model SR-ZG9080A
Vendor Sunricher
Description Curtain motor controller
Exposes cover (state, position), linkquality
Picture Sunricher SR-ZG9080A

Notes #

Device type specific configuration #

How to use device type specific configuration

Exposes #

Cover #

The current state of this cover is in the published state under the state property (value is OPEN or CLOSE). To control this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "OPEN"}, {"state": "CLOSE"}, {"state": "STOP"}. It’s not possible to read (/get) this value. To change the position publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"position": VALUE} where VALUE is a number between 0 and 100.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.