To contribute to this page, edit the following file

Blaupunkt SCM-S1 #

Model	SCM-S1
Vendor	Blaupunkt
Description	Roller shutter
Exposes	cover (state, position), linkquality
Picture

Notes #

Device type specific configuration #

How to use device type specific configuration

• invert_cover: By default the position/tilt values mean: open = 100, closed = 0. This can be inverted by setting this option to true (so open = 0, close = 100).

Exposes #

Cover #

The current state of this cover is in the published state under the state property (value is OPEN or CLOSE). To control this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "OPEN"}, {"state": "CLOSE"}, {"state": "STOP"}. To read the current state of this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}. To change the position publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"position": VALUE} where VALUE is a number between 0 and 100.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.

Manual Home Assistant configuration #

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

cover:
  - platform: "mqtt"
    availability_topic: "zigbee2mqtt/bridge/state"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    position_template: "{{ value_json.position }}"
    set_position_template: "{ \"position\": {{ position }} }"
    set_position_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    position_topic: "zigbee2mqtt/<FRIENDLY_NAME>"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.linkquality }}"
    unit_of_measurement: "lqi"
    enabled_by_default: false
    icon: "mdi:signal"
    state_class: "measurement"