Dawon DNS PM-S340R-ZB

ModelPM-S340R-ZB
VendorDawon DNS
DescriptionIOT smart switch 3 gang without neutral wire
Exposesswitch (state), linkquality
PictureDawon DNS PM-S340R-ZB

Exposes

Switch (top endpoint)

The current state of this switch is in the published state under the state_top property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_top": "ON"}, {"state_top": "OFF"} or {"state_top": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_top": ""}.

Switch (center endpoint)

The current state of this switch is in the published state under the state_center property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_center": "ON"}, {"state_center": "OFF"} or {"state_center": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_center": ""}.

Switch (bottom endpoint)

The current state of this switch is in the published state under the state_bottom property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_bottom": "ON"}, {"state_bottom": "OFF"} or {"state_bottom": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_bottom": ""}.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.