To contribute to this page, edit the following file

Dawon DNS PM-S240-ZB #

Model PM-S240-ZB
Vendor Dawon DNS
Description IOT smart switch 2 gang without neutral wire
Exposes switch (state), linkquality
Picture Dawon DNS PM-S240-ZB

Notes #

Routing functionality #

This device does not act as a router.

Exposes #

Switch (top endpoint) #

The current state of this switch is in the published state under the state_top property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_top": "ON"}, {"state_top": "OFF"} or {"state_top": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_top": ""}.

Switch (bottom endpoint) #

The current state of this switch is in the published state under the state_bottom property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state_bottom": "ON"}, {"state_bottom": "OFF"} or {"state_bottom": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state_bottom": ""}.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.