Zigbee2MQTT

HEIMAN HS1WL/HS3WL

ModelHS1WL/HS3WL
VendorHEIMAN
DescriptionWater leakage sensor
Exposeswater_leak, battery_low, tamper, battery, linkquality
PictureHEIMAN HS1WL/HS3WL

Notes

Pairing

Push the reset button of the device with a paperclip for 5 seconds close to the coordinator. While pairing the LED on the front is flashing green. Once the pairing is finished, the LED stays off.

Exposes

Water leak (binary)

Indicates whether the device detected a water leak. Value can be found in the published state on the water_leak property. It's not possible to read (/get) or write (/set) this value. If value equals true water leak is ON, if false OFF.

Battery low (binary)

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It's not possible to read (/get) or write (/set) this value. If value equals true battery low is ON, if false OFF.

Tamper (binary)

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It's not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.