Bacchus Duck Pool Thermometer
Model | Duck Pool Thermometer |
Vendor | Bacchus |
Description | Bacchus Duck pool thermomemeter |
Exposes | temperature, measurment_period, threshold, battery, voltage |
Picture | ![]() |
Options
How to use device type specific configuration
temperature_calibration
: Calibrates the temperature value (absolute offset), takes into effect on next report of device. The value must be a number.temperature_precision
: Number of digits after decimal point for temperature, takes into effect on next report of device. This option can only decrease the precision, not increase it. The value must be a number with a minimum value of0
and with a with a maximum value of3
Exposes
Temperature (numeric)
Measured temperature value. Value can be found in the published state on the temperature
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is °C
.
Measurment period (numeric)
Temperature measurement period. Value can be found in the published state on the measurment_period
property. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"measurment_period": NEW_VALUE}
. The minimal value is 0
and the maximum value is 3600
. The unit of this value is sec
.
Threshold (numeric)
Min threshold for alarm binding. Value can be found in the published state on the threshold
property. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"threshold": NEW_VALUE}
. The minimal value is 0
and the maximum value is 30
. The unit of this value is °C
.
Battery (numeric)
Remaining battery in %. Value can be found in the published state on the battery
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"battery": ""}
. It's not possible to write (/set
) this value. The minimal value is 0
and the maximum value is 100
. The unit of this value is %
.
Voltage (numeric)
Reported battery voltage in millivolts. Value can be found in the published state on the voltage
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"voltage": ""}
. It's not possible to write (/set
) this value. The unit of this value is mV
.