Custom devices (DiY) DNCKATSW001

ModelDNCKATSW001
VendorCustom devices (DiY)
DescriptionDNCKAT single key wired wall light switchopen in new window
Exposesswitch (state), linkquality
PictureCustom devices (DiY) DNCKATSW001

Exposes

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.