To contribute to this page, edit the following file

Custom devices (DiY) CC2530.ROUTER

Model CC2530.ROUTER
Vendor Custom devices (DiY)
Description CC2530 router
Supports state, description, type, rssi
Picture Custom devices (DiY) CC2530.ROUTER

Notes

Pairing

At first boot it will automatically be in pairing mode and join your network. To reset it into pairing mode power-cycle it three times as follows:

1) power on 2) wait 2sec 3) power off 4) repeat above steps 2 further times 5) power on and wait for it to join your network

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possbile with the following configuration:

CC2530.ROUTER

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    payload_on: true
    payload_off: false
    value_template: "{{ value_json.state }}"
    device_class: "connectivity"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "-"
    value_template: "{{ value_json.linkquality }}"