To contribute to this page, edit the following file

SMaBiT (Bitron Video) AV2010/37 #

Model AV2010/37
Vendor SMaBiT (Bitron Video)
Description Water detector with siren
Exposes water_leak, battery_low, linkquality
Picture SMaBiT (Bitron Video) AV2010/37

Notes #

Pairing #

Press and hold the function key for about 10 seconds until you hear a short beep. During the search, the LED lights up red once every 10 seconds. When the LED flashes 2 times, the device has successfully registered.

Exposes #

Water_leak (binary) #

Indicates whether the device detected a water leak. Value can be found in the published state on the water_leak property. It’s not possible to read (/get) or write (/set) this value. If value equals true water_leak is ON, if false OFF.

Battery_low (binary) #

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It’s not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.