To contribute to this page, edit the following file

SMaBiT (Bitron Video) AV2010/25 #

Model AV2010/25
Vendor SMaBiT (Bitron Video)
Description Wireless socket with metering
Exposes switch (state), power, energy, linkquality
Picture SMaBiT (Bitron Video) AV2010/25

Notes #

Pairing #

Press and hold the function key for about 10 seconds. During these 10 seconds, the function key will light up red several times. During the search, the LED lights up red once every 10 seconds. When the LED flashes twice, the unit has successfully registered.

Exposes #

Switch #

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

Power (numeric) #

Instantaneous measured power. Value can be found in the published state on the power property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is W.

Energy (numeric) #

Sum of consumed energy. Value can be found in the published state on the energy property. It’s not possible to read (/get) or write (/set) this value. The unit of this value is kWh.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.