To contribute to this page, edit the following file

SMaBiT (Bitron Video) AV2010/22 #

Model AV2010/22
Vendor SMaBiT (Bitron Video)
Description Professional motion detector
Exposes occupancy, battery_low, tamper, linkquality
Picture SMaBiT (Bitron Video) AV2010/22
White-label ClimaxTechnology IR-9ZBS-SL

Notes #

Pairing #

Pair the SMaBiT AV2010/22 sensor to Zigbee2MQTT by holding it close to the coordinator and pressing the indicator light/button at the front for about 10 seconds. The indicator light/button will flash red once to indicate it is in pairing mode. The SMaBiT AV2010/22 sensor should now be visible in the Zigbee2MQTT Devices overview.

Device type specific configuration #

How to use device type specific configuration

Exposes #

Occupancy (binary) #

Indicates whether the device detected occupancy. Value can be found in the published state on the occupancy property. It’s not possible to read (/get) or write (/set) this value. If value equals true occupancy is ON, if false OFF.

Battery_low (binary) #

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It’s not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Tamper (binary) #

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It’s not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.