To contribute to this page, edit the following file

Weiser 9GED18000-009 #

Model 9GED18000-009
Vendor Weiser
Description SmartCode 10
Supports lock/unlock, battery, pin code programming
Picture Weiser 9GED18000-009

Notes #

Pin code usage #

To retrieve the state, send a get message to the device topic (zigbee2mqtt/[DEVICE_FRIENDLY_NAME]/get) with the body {"pin_code":{"user":0}}. To set, sent a set message to the device topic (zigbee2mqtt/[DEVICE_FRIENDLY_NAME]/set) with the body {"pin_code":{"user":0,"pin_code":1234}}. To clear a code, call set but omit the value for pin_code.

Device type specific configuration #

How to use device type specific configuration

Manual Home Assistant configuration #

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

lock:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    value_template: "{{ value_json.state }}"
    state_locked: "LOCK"
    state_unlocked: "UNLOCK"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "%"
    device_class: "battery"
    value_template: "{{ value_json.battery }}"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    icon: "mdi:signal"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"