To contribute to this page, edit the following file
Lupus 12127 #
Model | 12127 |
Vendor | Lupus |
Description | 2 chanel relay |
Exposes | switch (state), linkquality |
Picture | ![]() |
Notes #
None
Exposes #
Switch (l1 endpoint) #
The current state of this switch is in the published state under the state_l1
property (value is ON
or OFF
).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_l1": "ON"}
, {"state_l1": "OFF"}
or {"state_l1": "TOGGLE"}
.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_l1": ""}
.
Switch (l2 endpoint) #
The current state of this switch is in the published state under the state_l2
property (value is ON
or OFF
).
To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_l2": "ON"}
, {"state_l2": "OFF"}
or {"state_l2": "TOGGLE"}
.
To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_l2": ""}
.
Linkquality (numeric) #
Link quality (signal strength).
Value can be found in the published state on the linkquality
property.
It’s not possible to read (/get
) or write (/set
) this value.
The minimal value is 0
and the maximum value is 255
.
The unit of this value is lqi
.
Manual Home Assistant configuration #
Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:
switch:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
payload_off: "OFF"
payload_on: "ON"
value_template: "{{ value_json.state_l1 }}"
command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/l1/set"
switch:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
payload_off: "OFF"
payload_on: "ON"
value_template: "{{ value_json.state_l2 }}"
command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/l2/set"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
value_template: "{{ value_json.linkquality }}"
unit_of_measurement: "lqi"
icon: "mdi:signal"