EchoStar SAGE206612

Model	SAGE206612
Vendor	EchoStar
Description	SAGE by Hughes doorbell sensor
Exposes	battery, action
Picture

Pairing

Press and hold the reset button while inserting the battery. Hold until the LED starts blinking, this will force a reset/join. The LED will continue blinking to indicate its pairing.

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It's not possible to read (/get) or write (/set) this value. The possible values are: bell1, bell2.