TuYa MIR-HE200-TY

Model	MIR-HE200-TY
Vendor	TuYa
Description	Human presence sensor with fall function
Exposes	illuminance_lux, presence, occupancy, motion_speed, motion_direction, radar_sensitivity, radar_scene, tumble_switch, fall_sensitivity, tumble_alarm_time, fall_down_status, static_dwell_alarm, linkquality
Picture

Notes

Pairing

Factory resetting by pushing the "Reset-Button" longer than 5 seconds or by using Touchlink factory reset.

Options

How to use device type specific configuration

• illuminance_lux_calibration: Calibrates the illuminance_lux value (percentual offset), takes into effect on next report of device. The value must be a number.

Exposes

Illuminance (lux) (numeric)

Measured illuminance in lux. Value can be found in the published state on the illuminance_lux property. It's not possible to read (/get) or write (/set) this value. The unit of this value is lx.

Presence (binary)

Indicates whether the device detected presence. Value can be found in the published state on the presence property. It's not possible to read (/get) or write (/set) this value. If value equals true presence is ON, if false OFF.

Occupancy (binary)

Indicates whether the device detected occupancy. Value can be found in the published state on the occupancy property. It's not possible to read (/get) or write (/set) this value. If value equals true occupancy is ON, if false OFF.

Motion speed (numeric)

Speed of movement. Value can be found in the published state on the motion_speed property. It's not possible to read (/get) or write (/set) this value.

Motion direction (enum)

direction of movement from the point of view of the radar. Value can be found in the published state on the motion_direction property. It's not possible to read (/get) or write (/set) this value. The possible values are: standing_still, moving_forward, moving_backward.

Radar sensitivity (numeric)

Sensitivity of the radar. Value can be found in the published state on the radar_sensitivity property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"radar_sensitivity": NEW_VALUE}. The minimal value is 0 and the maximum value is 10.

Radar scene (enum)

Presets for sensitivity for presence and movement. Value can be found in the published state on the radar_scene property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"radar_scene": NEW_VALUE}. The possible values are: default, area, toilet, bedroom, parlour, office, hotel.

Tumble switch (enum)

Tumble status switch. Value can be found in the published state on the tumble_switch property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"tumble_switch": NEW_VALUE}. The possible values are: ON, OFF.

Fall sensitivity (numeric)

Fall sensitivity of the radar. Value can be found in the published state on the fall_sensitivity property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"fall_sensitivity": NEW_VALUE}. The minimal value is 1 and the maximum value is 10.

Tumble alarm time (numeric)

Tumble alarm time. Value can be found in the published state on the tumble_alarm_time property. It's not possible to read (/get) this value. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"tumble_alarm_time": NEW_VALUE}. The minimal value is 1 and the maximum value is 5. The unit of this value is min.

Fall down status (enum)

Fall down status. Value can be found in the published state on the fall_down_status property. It's not possible to read (/get) or write (/set) this value. The possible values are: none, maybe_fall, fall.

Static dwell alarm (text)

Static dwell alarm. Value can be found in the published state on the static_dwell_alarm property. It's not possible to read (/get) or write (/set) this value.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.