To contribute to this page, edit the following file

Oujiabao CR701-YZ #

Model CR701-YZ
Vendor Oujiabao
Description Gas and carbon monoxide alarm
Exposes gas, carbon_monoxide, tamper, battery_low, linkquality
Picture Oujiabao CR701-YZ

Notes #

None

Exposes #

Gas (binary) #

Indicates whether the device detected gas. Value can be found in the published state on the gas property. It’s not possible to read (/get) or write (/set) this value. If value equals true gas is ON, if false OFF.

Carbon_monoxide (binary) #

Indicates if CO (carbon monoxide) is detected. Value can be found in the published state on the carbon_monoxide property. It’s not possible to read (/get) or write (/set) this value. If value equals true carbon_monoxide is ON, if false OFF.

Tamper (binary) #

Indicates whether the device is tampered. Value can be found in the published state on the tamper property. It’s not possible to read (/get) or write (/set) this value. If value equals true tamper is ON, if false OFF.

Battery_low (binary) #

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It’s not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.