To contribute to this page, edit the following file
RGB Genie ZGRC-KEY-013 #
Model | ZGRC-KEY-013 |
Vendor | RGB Genie |
Description | 3 Zone remote and dimmer |
Exposes | battery, action, linkquality |
Picture | ![]() |
Notes #
Deprecated click event #
By default this device exposes a deprecated click
event. It’s recommended to use the action
event instead.
To disable the click
event, set legacy: false
for this device in configuration.yaml
. Example:
devices:
'0x12345678':
friendly_name: my_device
legacy: false
Device type specific configuration #
How to use device type specific configuration
-
legacy
: Set tofalse
to disable the legacy integration (highly recommended!) (default: true) -
simulated_brightness
: Set totrue
to simulate abrightness
value (default:false
). If this device provides abrightness_move_up
orbrightness_move_down
action it is possible to specify the update interval and delta. This can be done by instead of specifyingtrue
:
simulated_brightness:
delta: 20 # delta per interval, default = 20
interval: 200 # interval in milliseconds, default = 200
Exposes #
Battery (numeric) #
Remaining battery in %.
Value can be found in the published state on the battery
property.
It’s not possible to read (/get
) or write (/set
) this value.
The minimal value is 0
and the maximum value is 100
.
The unit of this value is %
.
Action (enum) #
Triggered action (e.g. a button click).
Value can be found in the published state on the action
property.
It’s not possible to read (/get
) or write (/set
) this value.
The possible values are: brightness_move_up
, brightness_move_down
, brightness_stop
, on
, off
, recall_*
.
Linkquality (numeric) #
Link quality (signal strength).
Value can be found in the published state on the linkquality
property.
It’s not possible to read (/get
) or write (/set
) this value.
The minimal value is 0
and the maximum value is 255
.
The unit of this value is lqi
.
Manual Home Assistant configuration #
Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
icon: "mdi:toggle-switch"
value_template: "{{ value_json.click }}"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "%"
value_template: "{{ value_json.battery }}"
device_class: "battery"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
value_template: "{{ value_json.action }}"
icon: "mdi:gesture-double-tap"
sensor:
- platform: "mqtt"
state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
availability_topic: "zigbee2mqtt/bridge/state"
unit_of_measurement: "lqi"
value_template: "{{ value_json.linkquality }}"
icon: "mdi:signal"