To contribute to this page, edit the following file

TuYa TS0601_cover #

Model TS0601_cover
Vendor TuYa
Description Curtain motor/roller blind motor/window pusher/tubular motor
Exposes cover (state, position), options, linkquality
Picture TuYa TS0601_cover
White-label Yushun YS-MT750, Zemismart ZM79E-DT, Binthen BCM100D, Binthen CV01A, Zemismart M515EGB, Tuya M515EGZT, TuYa DT82LEMA-1.2N, Moes AM43-0.45/40-ES-EB, Larkkey ZSTY-SM-1SRZG-EU, Zemismart ZM25TQ, Zemismart AM43, Zemismart M2805EGBZTN, Zemismart BCM500DS-TYZ, A-OK AM25

Notes #

Configuration of device attributes #

By publishing to zigbee2mqtt/FRIENDLY_NAME/set various device attributes can be configured:

{
    "options":{
        "reverse_direction": xxx
    }
}

Device type specific configuration #

How to use device type specific configuration

Exposes #

Cover #

The current state of this cover is in the published state under the state property (value is OPEN or CLOSE). To control this cover publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "OPEN"}, {"state": "CLOSE"}, {"state": "STOP"}. It’s not possible to read (/get) this value. To change the position publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"position": VALUE} where VALUE is a number between 0 and 100.

Options (composite) #

Can be set by publishing to zigbee2mqtt/FRIENDLY_NAME/set with payload {"options": {"motor_speed": VALUE}}

Linkquality (numeric) #

Link quality (signal strength). Value can be found in the published state on the linkquality property. It’s not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.

Manual Home Assistant configuration #

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

cover:
  - platform: "mqtt"
    availability_topic: "zigbee2mqtt/bridge/state"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    position_template: "{{ value_json.position }}"
    set_position_template: "{ \"position\": {{ position }} }"
    set_position_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"
    position_topic: "zigbee2mqtt/<FRIENDLY_NAME>"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    value_template: "{{ value_json.linkquality }}"
    unit_of_measurement: "lqi"
    enabled_by_default: false
    icon: "mdi:signal"
    state_class: "measurement"