To contribute to this page, edit the following file

HEIMAN HS1SA-M #

Model HS1SA-M
Vendor HEIMAN
Description Smoke detector
Supports smoke
Picture HEIMAN HS1SA-M

Notes #

Pairing #

Press the side button of the device with a paper clip for more than 2 seconds. The main button led will flash. Then make sure the device is awake during pairing phase or the configuration may fail. To ensure device is awake press the main button every 2 seconds until configuration is done in zigbee2mqtt logs.

Important #

There are 3 versions of this device: Standalone, Zigbee and Z-wave. These are visualy identical. Make sure to get the correct version that will work with zigbee2mqtt:

Supported:

Unsupported:

The product code should end in -M for the Zigbee version. The label inside the battery compartment should also show the Zigbee logo.

Manual Home Assistant configuration #

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possible with the following configuration:

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    payload_on: true
    payload_off: false
    value_template: "{{ value_json.smoke }}"
    device_class: "smoke"

binary_sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    payload_on: true
    payload_off: false
    value_template: "{{ value_json.battery_low}}"
    device_class: "battery"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    icon: "mdi:signal"
    unit_of_measurement: "lqi"
    value_template: "{{ value_json.linkquality }}"