To contribute to this page, edit the following file

Gledopto GL-S-004Z

Model GL-S-004Z
Vendor Gledopto
Description Zigbee Smart WW/CW GU10
Supports on/off, brightness, color temperature
Picture Gledopto GL-S-004Z

Notes

Pairing

Some of the Gledopto devices are not providing a modelID, in that case the modelID undefined is shown. Sometimes it helps to repair the device while keeping it close to the coordinator (less than one meter).

If this fails, the modelID has to be set manually in data/database.db. First find out the modelID of your devices from the Supported devices page. Then open data/database.db and add the modelId as highlighted in bold below.

{“id”:50,”type”:”Router”,”ieeeAddr”:”0x00124b0019c606cd”,”nwkAddr”:10828,”manufId”:0, “manufName”:”GLEDOPTO”,”powerSource”:”Mains (single phase)”,“modelId”:”GL-S-007Z”, “epList”:[11,13],”status”:”offline”,”joinTime”:null,”endpoints”:{ “11”:{“profId”:49246,”epId”:11,”devId”:528,”inClusterList”:[0,3,4,5,6,8,768], “outClusterList”:[],”clusters”:{“genBasic”:{“dir”:{“value”:1},”attrs”:{}}, “genIdentify”:{“dir”:{“value”:1},”attrs”:{}},”genGroups”:{“dir”:{“value”:1},”attrs”:{}}, “genScenes”:{“dir”:{“value”:1},”attrs”:{}},”genOnOff”:{“dir”:{“value”:1},”attrs”:{}}, “genLevelCtrl”:{“dir”:{“value”:1},”attrs”:{}},”lightingColorCtrl”:{“dir”:{“value”:1},”attrs”:{}}}}, “13”:{“profId”:49246,”epId”:13,”devId”:57694,”inClusterList”:[4096],”outClusterList”:[4096], “clusters”:{“lightLink”:{“dir”:{“value”:3},”attrs”:{}}}}},”_id”:”geCEMkRqlaMe6muE”}

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possbile with the following configuration:

GL-S-004Z

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    color_temp: true
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "-"
    value_template: "{{ value_json.linkquality }}"