To contribute to this page, edit the following file

Gledopto GL-C-007

Model GL-C-007
Vendor Gledopto
Description Zigbee LED controller RGBW
Supports on/off, brightness, color, white
Picture Gledopto GL-C-007

Notes

Pairing

  1. Switch on your device.
  2. Now switch off and on within 2 seconds.
  3. Repeat off/on four times.
  4. Reset is done when the device is switched on in the fifth time and the light stays on after blinking 4 times

Device type specific configuration

How to use device type specific configuration

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possbile with the following configuration:

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    xy: true
    white_value: true
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "-"
    value_template: "{{ value_json.linkquality }}"