Zigbee2MQTT

OSRAM AB3257001NJ

ModelAB3257001NJ
VendorOSRAM
DescriptionSmart+ plug
Exposesswitch (state), linkquality
PictureOSRAM AB3257001NJ
White-labelLEDVANCE AB3257001NJ, LEDVANCE AC03360

Notes

Pairing

For the OSRAM Smart+ plug (AB3257001NJ) hold the on/off button until your hear a click (+- 10 seconds).

Caveats

Does not pass every attribute when acting as the routing parent for some end devices which send messages right after each other.

See also #2274open in new window, note that the no occupancy for the Xiaomi RTCGQ11LM has been fixed.

OTA updates

This device supports OTA updates, for more information see OTA updates.

Options

How to use device type specific configuration

  • state_action: State actions will also be published as 'action' when true (default false). The value must be true or false

Exposes

Switch

The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.

On with timed off

When setting the state to ON, it might be possible to specify an automatic shutoff after a certain amount of time. To do this add an additional property on_time to the payload which is the time in seconds the state should remain on. Additionnaly an off_wait_time property can be added to the payload to specify the cooldown time in seconds when the switch will not answer to other on with timed off commands. Support depend on the switch firmware. Some devices might require both on_time and off_wait_time to work Examples : {"state" : "ON", "on_time": 300}, {"state" : "ON", "on_time": 300, "off_wait_time": 120}.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.