To contribute to this page, edit the following file

Device

Model 7299760PH
Vendor Philips
Description Hue Bloom
Supports on/off, brightness, color xy, power-on behavior
Picture ../images/devices/7299760PH.jpg

Notes

Pairing

Philips LivingColors IRIS and Philips LivingColors Bloom Devices that comes with Philips (HUE) Remote Gen 2 (Touch Wheel) or Gen 3 (Round Click Wheel) can be paired via Zigbee. Devices with Gen 1 Remote don’t use Zigbee and can not be paired. The Philips LivingColors Remote can not be paired via Zigbee because it only support ZigBee Light Link (ZLL).

To Pair hold Button ON and Bottom Left Key (Favorite 1) on the Remote in Front of the Device until the Device Light blinks and lights Orange. If connection was succesfull the Device Light will light Green.

WARNING: If you pair your Device to a Zigbee Network which is not using a ZLL Channel you can’t reset the Device with the Philips LivingColors Remote Gen 3. The Gen 3 Remote will only try ZLL Channels to find the Device! Maybe it’s possible to reset the Device with a Philips LivingColors Remote Gen 2 as it should try all Zigbee Channels to find the Device.

Philips LivingColors Bloom Manual

Philips LivingColors Iris Manual

Pairing

Factory reset the light bulb see HOWTO: Factory reset a Hue bulb. After resetting the bulb will automatically connect.

This may also be possible with the Tradfri Remote Control by pressing and holding the reset button on the bottom of the remote (next to the battery). This may not always work.

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possbile with the following configuration:

7299760PH

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    xy: true
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "-"
    value_template: "{{ value_json.linkquality }}"