To contribute to this page, edit the following file

Device

Model 7146060PH
Vendor Philips
Description Hue Go
Supports on/off, brightness, color temperature, color xy, power-on behavior
Picture ../images/devices/7146060PH.jpg

Notes

Pairing

Factory reset the light bulb see HOWTO: Factory reset a Hue bulb. After resetting the bulb will automatically connect.

This may also be possible with the Tradfri Remote Control by pressing and holding the reset button on the bottom of the remote (next to the battery). This may not always work.

For the 7146060PH (Philips Hue Go), the power cord has to be connected, after the blinking light (INSTEAD of step four in the video), press and keep holding the button on the bottom until the device is paired (+- 60 seconds). While holding the button the Hue Go will give you a nice light show :smile:.

Manual Home Assistant configuration

Although Home Assistant integration through MQTT discovery is preferred, manual integration is possbile with the following configuration:

7146060PH

light:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    brightness: true
    color_temp: true
    xy: true
    schema: "json"
    command_topic: "zigbee2mqtt/<FRIENDLY_NAME>/set"

sensor:
  - platform: "mqtt"
    state_topic: "zigbee2mqtt/<FRIENDLY_NAME>"
    availability_topic: "zigbee2mqtt/bridge/state"
    unit_of_measurement: "-"
    value_template: "{{ value_json.linkquality }}"